Polyalphaolefin (PAO) Air Compressor LubricantsThis product is a combination of high-grade synthetic PAO and ester base fluids and specially engineered additive systems. They are used successfully for the long term lubrication of screw, centrifugal or reciprocating (piston type) air compressors. These 100% premium synthetic oils are used where maximum seal, paint, and plastic compatibility is required. Airtop Superior 32, Superior 46 and Superior 68 are designed for rotary screw and centrifugal air compressors and will offer a typical service life of up to 8,000 hours and more under normal industrial operating conditions. Airtop Superior 100, Superior 150 and Superior 220 are designed for rotary vane and reciprocating compressors.
Reduced compressor maintenance with very long drain intervals. Up to 8 times the service life of mineral oils. Low friction properties and resistance to viscosity increase from oxidation. This helps improve operating efficiency and saves money on energy consumption. Excellent foam control, reducing heat, oxidation, and wear. High-contact regions are protected against wear for increased compressor life and efficiency. Enhanced water separation. Water from condensation can cause unwanted oil/water formation, readily separates from water, and is anti-rust fortified. Water can be easily drained off for simplified environmental discharge and increased oil life; Increased resistance to varnish, carbon and acid formation. Providing better protection and longer service life than petroleum oils, especially during hot operating conditions. Low volatility, resulting in lower evaporation losses and fewer problems with the oil getting into air tools, instruments or even the production process. It also means there is less oil to remove in the air/oil separators and fewer air filter changes. Fire and explosion possibilities are greatly reduced due to the low carbon forming tendencies and due to the relatively high flash, fire, and auto ignition points. Operating temperature reduction. High viscosity index. This results in a minimum change in viscosity with temperature. The adequate viscosity for proper lubrication is provided regardless of temperature change; Excellent cold temperature starting and pumpability; Good compatibility with all types of seals and coatings.
Performance level
DIN 51506 VDL 
