Service lubricant for open gears
The range of this product contains state of the art, solids fortified product for the lubrication of open gear. The lubricant an aluminium complex thickened and formulated with high quality base oil and a set of anti-seize and anti-corrosive additives and EP (Extreme Pressure) and adhesion improvers. The added graphite provides a very stable and lubricating and adherent film possessing superior resistance to high temperatures and loads. It shows optimum efficiency and meets the requirements of crown drives in ball and rotary mills. It also passes the DeLimon and Helios spraying tests, suitable for application through centralised lubrication or lubrication systems. The range of this products is free of components which are harmful to the environment (bitumen, chlorine, heavy metals and solvents).
The range of this products has been specially formulated for the lubrication of large girth mills and kiln open gear sets in the cement and mining industry as well as in particular chemical and metal applications. Thanks to its adhesive properties this products are also very suitable for the lubrication of bearings and sliding bearings operating under the combined action of loads, water and increased temperatures. The state of the art anti-wear additive technology reduces the friction between the gear teeth to a minimum, resulting in a smooth and trouble free operation of the crown, at the same time the wear is being reduced to a minimum even in the most severe conditions.
- Excellent anti-rust protection
- Free of heavy metals as well as chlorine and bitumen
- Good mechanical stability
- Good pumpability
- High anti wear and friction reducing properties
- High dropping point
- Interval working temperature up to 170 °C and dry lubrication up to 450 °C
- Thermal and oxidative stability